Articulated  joint   Good coating technology   Strong shear power  The core design of ER4 series: The legendary articulated swing floating joint. The 4 wheels keeps in contact with the ground and the machine moves with Max traction. And it also has unrivalled manoeuvrability.   Good quality coating technology is an important factor of our quality standard. Compared with traditional wet painting, The powder coating can obviously increase the life   The torque on the wheel is increased by the drive of the planetary shaft, thus increasing the shear force. Because of the best ratio between shear force and machine capacity, you can work flexibly and economically at the same time.   Two stronger cylinders   Robust telescopic arm    Lubrication points Everun China small loader ER1200F is equipped with powerful lifting cylinders on all ER4 series wheel loaders to ensure that the load distribution is always transmitted to the loading arm in the best way. In addition, the whole loading system also achieved stability. The size of the lifting cylinder is adjusted according to the size of the machine.   The telescopic arm is firm and stable. Parallel movement is carried out hydraulically. All important hydraulic pipelines are inside and protected from external influences. The telescopic arm of EVERUN wheel loader combines the advantages of articulated machine and telescopic fork loader. Therefore, the overhead empty loading height is not a problem.   Regular lubrication of all lubrication points of a machine is essential for proper and efficient maintenance of the machine and thus preserving its value. To save time and make work easier, Everun’s lubrication service points are always located in easy-to-access locations. Alternatively, the lubrication can be taken over for you with a central lubrication system.   Short hydraulic hose   New hood design   Ergonomic joysticks Everun machines have shorter hydraulic hose lengths; the hoses split in several places. If a hydraulic hose needs to be replaced, it is not necessary to replace the entire hose in the hydraulic circuit, only the affected part. This dramatically speeds up work and saves money.   The new engine cover adopts stronger material, taking into account the appearance design and function, and realizes lower noise and better heat dissipation effect. Cast iron rear bumper, heavier but thinner than normal rear bumper, provides better balanced support for wheel loader.   The joystick fits safely and comfortably in your hand. Great control and sensitivity. This way, you always have control over the machine and its key functions.   Comfortable working area   Wide choice of tires   Comfortable seat Vibration and shock are absorbed by the machine. Your body is well protected, and you work longer, relaxed and fatigue-free, and therefore more focused.   The Best Tires for Every Roadbed: You can choose from a variety of different tires for your Everun machine.   Different types of seats are available to choose from, perfectly fitting to your machine.   Lots of attachments   Use your machine as a multi-function tool: you can select a variety of attachments for EVERUN.

The telescopic mini loader is mainly composed of a power system, hydraulic system, drive system, telescopic arm system, operating system, and vehicle body. The power system usually uses diesel or electric engines to provide power for the machine; The hydraulic system ensures the operational stability and efficiency of the machine; The driving system enables the machine to have strong passability; The telescopic arm system is its core, providing a larger operating range; The operating system ensures easy and precise operation through hydraulic control and electronic systems.

The working principle of the telescopic mini loader

The working principle of the telescopic mini loader is mainly based on its telescopic device and hydraulic system. The telescopic arm is driven to extend or retract by a hydraulic cylinder, and combined with the driving system and control system, it realizes the loading, unloading, and handling of goods.

When operating a telescopic mini loader, it is important to ensure that the loader is in a stable state and there are no obstacles around it before starting the engine; Place the control lever in forward or reverse gear, lightly press the accelerator pedal, and start smoothly; Extend or retract the telescopic arm as needed. When extending, operate the corresponding control valve to allow hydraulic oil to flow into the extension pipe, driving the hydraulic cylinder to extend; Before loading, ensure that the work site is flat and remove obstacles such as falling rocks; After parking, place the directional control lever in the center position, turn off the engine, and install the front and rear body safety connecting rods. By following the above operating instructions, the safe and efficient operation of the telescopic mini loader can be ensured.

Inspection and maintenance of telescopic mini loader

The maintenance of the telescopic mini loader mainly includes regular checks on hydraulic oil, engine oil, coolant, etc. to ensure smooth operation of the machine. The hydraulic system requires regular replacement of hydraulic oil and inspection of the oil circuit for leaks; The engine needs to be regularly replaced with oil and filter cartridges, and the air filter needs to be cleaned to ensure smooth airflow; At the same time, check the cooling system, clean the radiator, and prevent overheating. Tires need to be checked for air pressure and wear to ensure sufficient grip and safety. In addition, it is necessary to regularly inspect the telescopic arm’s connecting components, chains, and hinge points to ensure that they are not loose or damaged. Finally, after each use, clean the machine to avoid the accumulation of soil and garbage, and extend the lifespan of the equipment.

Telescopic arm technology improves work efficiency

The telescopic mini loader’s telescopic arm technology is one of the core features of the equipment. It significantly improves operating efficiency, especially in small spaces and complex environments, and its advantages are even more obvious.

1. Extending the working radius and lifting height: The telescopic arm enables the mini loader to adjust the height and working radius of the bucket under different working conditions. Through the telescopic function of the telescopic arm, the operator can perform shoveling, grabbing, and other operations at a higher position.
2. Improving material handling efficiency: They can improve material handling efficiency through the telescopic arm.
3. Flexibly responding to operations in small spaces: The telescopic arm system of the telescopic mini loader enables it to adapt to efficient operations in small spaces.
4. Improving operation accuracy and safety: The telescopic mini loader can perform tasks more accurately, such as fine handling, and easily operate heavier or special objects through the precise adjustment of the telescopic arm system.
5. Reducing the frequency of equipment movement: Another key advantage of the telescopic arm is that it reduces the frequency of equipment movement on site.
6. Enhancing the adaptability of operations: The telescopic mini loader is suitable for high-altitude operations and can work efficiently in uneven environments such as deep pits and rugged terrain.
7. Improving the versatility of equipment: The telescopic arm technology improves the versatility of the telescopic mini loader, enabling it to be widely used in multiple fields.